The STL files for our vintage ornate frames, allowing you to print the model with a 3d printer for both personal and commercial use.

This design features a weathered, vintage ornate design around the borders of the frames.

Included are two versions of your chosen frame(s) – one features a snap-fit back, and one features a solid back. The best of both worlds, no extra cost!

These are for 2.5″ x 2.5″ magnets. We also these frames for 2″ x 2″ magnets here.

Will magnets from x machine fit?

If your magnet press produces square 2.5 x 2.5″ magnets, regardless of variance between machines, you should be covered.

Included are multiple files for common press sizes (Titan, MPRO etc),  test prints to check your fit, and a handy print and scaling guide should you need to make any subtle adjustments based on press technique or materials used.

The design should cover pretty much any 2.5″ press out there, but if you have any sizing issues just get in touch and I can make adjustments for you.

This is a downloadable purchase containing STL files for 3d printing only.

Included:

• STL files (two versions of the frame)
• A full guide to 3d printing.

Approximate / average measurements:

1 magnet frame: 13 cm x 13 cm
2 magnet frame: 13 cm x 23 cm
4 magnet frame: 23 cm x 23 cm
Frame thickness: 1.4 cm

NOTES:

Please check the sizes can fit on your printer bed. While all fit on a Bambu A1, only the 1 magnet frame will fit on a Bambu A1 Mini bed.

These models are quite detailed and take a while to print. Here are the rough print times and filament use for the frames.

1 magnet frame: 2h50m / 60g
2 magnet frame: 4h50m / 100g
4 magnet frame: 8h20m / 175g

License details

Purchase of the STL files permits you to: Print the model for personal or commercial use, i.e gifting or selling the finished, fully printed model.

You are NOT permitted to: Share, sell, remix, or edit the STL files, either for personal or commercial use.