The STL files for our collection of bordered frames, allowing you to print the model with a 3d printer for both personal and commercial use.

Includes 2 frame models (one and two magnet frames) and 4 snap-fit-back models (with and without stands).

The frames are made for 2.5 x 3.5 and 2 x 3 inch magnets. You can choose your size. We also have the same design for 2 x 2 inch magnets and also 2.5 x 2.5 magnets.

Will these fit magnets from x machine?

If your magnet press produces 2.5″x3.5″ or 2″x3″magnets, regardless of variance between machines, you should be covered.

Included are files for common size variances, low filament cost test prints to check your fit, and a handy print and scaling guide should you need to make any subtle adjustments based on press technique or materials used.

This should cover pretty much any press out there, but if you have any sizing issues just get in touch and I can make adjustments for you.

What are snap-fit backs?

We’ve designed our frames with snap-fit backs and stands, allowing you to easily switch the frame style whenever you like. Stick on a fridge? Easy. Switch to a standing frame for the desk? No problem!

How are they different from other frames?

Other frames:

• Often have stand legs that poke out under the frame.
• Often need additional round magnets in the frame itself to use as a flat magnet (e.g on the fridge)

Our snap-fit frames:

• Hidden stands for a sleek look – no legs visible from the front.
• No need for additional magnets to use as a flat frame – you’re already framing magnets! Pop out the snap-fit back and the frame uses the magnets its framing.
• Interchangeable and easily swapped out, with a cut-out to easily pop out magnets at the rear.
• Low filament cost (typically 10-20g per snap fit back)

This is a downloadable purchase containing STL files for 3d printing only – if you would like to purchase the already printed frames, you can do so here.

Included:

• STL files (2 frames, with matching snap-fit back styles)
• A full guide to 3d printing.

Approximate frame measurements:

Frame thickness: 1.35cm
Frame height & length (interchangeable as you can rotate the frames)
– 1 magnet frame: H 13cm / L 15.5cm
– 2 magnet frame: H 15.5cm / L 21cm

NOTE: Please check the sizes can fit on your printer bed. e.g The 2 magnet frame is approximately 21cm in length. You will need a print bed size that can fit this size, such as the Bambu A1. The Bambu A1 mini, for example, would be too small for this frame.

License details

Purchase of the STL files permits you to:

Print the model for personal or commercial use, i.e gifting or selling the finished, fully printed model.

You are NOT permitted to:

Share, sell, remix, or edit the STL files, either for personal or commercial use.