The STL files for our modern & minimal desk cube roller, allowing you to print the model with a 3d printer for both personal and commercial use.

Available in 2 x 2″ and 2.5 x 2.5″ magnet sizes (select below).

This sleek little beauty can fit four square magnets in the roller cube. The cube can easily be removed from the frame, and there’s a recessed lid on the side allowing magnets to be slotted in and out.

No additional parts or accessories are needed, there’s no need for any round button magnets like many other frames, every part is printable.

• This is a downloadable purchase containing STL files for 3d printing only – if you would like to purchase the frame itself, you can do so here.
• As different machines can produce slightly different size magnets, included are models for various size and press variations (e.g for 2×2″ magnets there are 50mm and 50.8mm etc.) If you have any sizing issues, I can modify the files for you.

Included:

• STL files (4 individual files that make up the model)
• A full guide to 3d printing and assembly

Approximate model measurements:

Measurements can vary slightly based on the sizing variation of your magnets (we’ve included multiple sizes for various different presses), so these are approximate/average measurements:

2×2″

Stand & Cube Height: 80mm
Stand Height: 65 mm
Stand Width: 75 mm
Cube Dimensions: 60 x 60 x 60 mm

2.5×2.5″
Stand & Cube Height: 108mm
Stand Height: 82 mm
Stand Width: 96 mm
Cube Dimensions: 76 x 76 x 76 mm

License details

Purchase of the STL files permits you to: Print the model for personal or commercial use, i.e gifting or selling the finished, fully printed model.

You are NOT permitted to: Share, sell, remix, or edit the STL files, either for personal or commercial use.