The STL files for our popular HEARTS photo magnet cube roller, allowing you to print the model with a 3d printer for personal and commercial use.

This gorgeous frame can fit 4 x 2×2″ magnets in the roller cube. The cube can be removed from the frame, and there’s a hidden lid on the side which allows for magnets to be slotted in and out.

No additional parts or accessories are needed, there’s no need for any round button magnets like other frames out there, every part is printable via the STL files.

• This is a downloadable purchase containing STL files for 3d printing only – if you would like to purchase the frame itself, you can do so here.
• As different 2×2″ machines can produce slightly different size magnets, included are models for both 50mm (common Chinese magnet press sizing) and 50.8mm (true 2×2″). If you have any sizing issues, I can modify the files for you.

Included:

• STL files (6 individual files that make up the model)
• A full guide to 3d printing and assembly

Note: 200mm is the longest side of the HEARTS frame. You will need a printer with a print bed that can handle a print this size.

Approximate model measurements:

Height: 200 mm
Width: 160 mm
Heart Frame Depth: 30 mm
Cube Dimensions: 60 x 60 x 60 mm

License details

Purchase of the STL files permits you to:

Print the model for personal or commercial use, i.e gifting or selling the finished, fully printed model.

You are NOT permitted to:

Share, sell, remix, or edit the STL files, either for personal or commercial use.